Frigidaire FPHS2699KF Use and Care Manual - Page 9

Frigidaire Gallery Controls Frigidaire Pro User Interface Your refrigerator is equipped with a user interface display. It is only necessary to touch the glass. There is no need to press with force. Touch an icon to activate the desired dispenser mode. The active dispenser mode is more brightly illuminated. quick ice (Gallery only) quick freeze (Gallery only) Increases the production of ice Activates a faster rate for freezing food power plus ice Increases the production of ice (Pro only) power plus freeze Activates a faster rate for freezing (Pro only) food light on-off On / Off control lock Press and hold for three seconds to activate and deactivate. This restricts undesired changes to the refrigerators settings and prevents use of the ice and water dispenser. User Variable Options Touching the options icon displays the following options: water filter Touch to display filter condition status. Press and hold for three seconds to reset. air filter Touch to display filter status. Press and hold for three seconds to reset. display on-off When active, it allows the display of the freezer and fridge temps. C/F Touch to toggle display from Fahren- heit to Celsius. default settings Resets all refrigerator settings such as temp, temp display, and alarm tones to their factory default settings. power on-off Press and hold for three seconds to turn off the cooling system to clean the refrigerator. It also turns off all dispenser functions. The temperature display will read OFF. IMPORTANT Pressing the power off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet. Setting Cooling Temperatures Press the ∧ or ∨ indicator to adjust the temperature to the desired setting. The temperature display will begin to blink with the first touch. After five (5) seconds of inactivity, the display will beep to accept the new temperature. Alarms Door Ajar High Temp If the door has been left open for an extended period of time greater than 5 minutes, an alarm will sound and the door ajar indicator will display in the middle. The alarm is turned off by closing the door. The alarm off key will illuminate to prompt the reset of any pending alarms. Press this key to reset any system Alarms. In the event of a high temperature condition, the temperature display will display "HI". After 20 minutes, the high temp alert will be displayed and the alarm off icon will illuminate until pressed, acknowledging the alarm, at which time the highest temperature reached will be displayed and the refrigerator will resume normal operation. All other modes are turned off until the alarm is acknowledged. Power Fail In the event of a power failure, the power fail alert will be displayed and the alarm off key will be illuminated and you will hear an audible alarm until the alarm off icon is pressed, acknowledging the alarm. Other modes may be turned off until the alarm is acknowledged. When the power fail alert is turned off, the refrigerator will resume normal operation. The high temp alarm may also be illuminated until a safe operating range temperature has been reached. 9