Frigidaire FPRU19F8QF Complete Owner's Guide - Page 9

ELECTRONIC CONTROL Setting the PRO-SELECT™ Electronic Control Cool Down Period For safe food storage, allow 4 hours for refrigerator to cool down completely. The refrigerator will run continuously for the first several hours. Pro-Select™ Electronic Control The Pro-Select™ Electronic Control is located inside the refrigerator. Temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. °F To adjust the temperature setting, press the UP () key for warmer temperature and DOWN () key for colder temperature on the control panel. Allow several hours for the temperature to stabilize between adjustments. The refrigerator can be adjusted between 33°F (1°C) and 46°F (8°C). By pressing the TEMP MODE key, the temperature display will toggle between °F and °C. To turn the refrigerator OFF, press the UP () key until the warmest temperature setting of 46°F (8°C) shows in the display. Then press the UP () key 3 times within 3 seconds to turn the refrigerator OFF. The display will then show "OF". To turn the unit back ON, press the DOWN () key 3 times within 3 seconds. The control will then display "46°F (8°C)" and may be adjusted to the desired temperature. PRO-SELECT™ Electronic Control Features Replace Air Filter When the "REPLACE AIR FILTER" LED is illuminated yellow, the air filter needs to be replaced. The control will signal for air filter replacement after 3600 hours of refrigerator operation. After replacing the air filter, reset the air filter timer by pressing the AIR FILTER key for 3 seconds. The "REPLACE AIR FILTER" LED will be illuminated green for 3 seconds, confirming a timer reset. °F 9