Frigidaire FRA054XT7 Complete Owner's Guide (English) - Page 7

Operating Instructions Operating Instructions (continued) TO CHANGE TEMPERATURE DISPLAY: YOU WILL SEE: DO THIS: PRESS AND HOLD THE UP/DOWN BUTTONS TOGETHER FOR 3 SECONDS FAULT CODES Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. TO TURN UNlT OFF: If the display reads "AS" or "ES", a sensor has failed. Contact your Authorized Frigidaire Service Center. DO THIS: PRESS ON/ OFF BUTTON ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time. There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having to roll through to select another mode. The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees. After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored. AUGER WHEELS Air Directional Louvers Air directional louvers control air flow direction. Your air conditioner has the louver type described below. (8-WAY) 2009 Electrolux Home Products, Inc. Auger Type The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed. Rotate the Auger Wheels until the desired Left/Right direction is obtained. Pivot horizontal louvers until the desired Up/Down direction is obtained. All rights reserved. 7