Frigidaire FRA054XT7 Installation Instructions (All Languages) - Page 4

Installation 7RVHFXUHORZHUVDVKLQSODFHDWWDFKULJKWDQJOHVDVKORFNZLWKƎPP VFUHZDVVKRZQ),*  NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by window itself. Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 11). FIG. 10 FIG. 11 FOAM SEAL After the completion of the installation, please check the machine's lean as shown (FIG. 12A & FIG. 12B). It's necessary for proper condensed water utilization and drainage. FIG. 12A FIG. 12B H INSIDE OUTSIDE H about ƎaƎ Bottom Rail Wooden Window H INSIDE OUTSIDE H=H1-H2 DERXWƎaƎ H1 H2 Bottom Rail Vinyl-Clad Window Trim the weather seal with a proper length, peel off the protective backing and plug any gaps if needed DVVKRZQ),* Removing the air conditioner From Window Turn the air conditioner off, and disconnect power cord. Remove sash seal from between windows, and unscrew sash lock. Remove screws installed through frame and framelock. Close (slide) side panels into frame. Keeping a firm grip on air conditioner, raise sash and carefully remove. Be careful not to spill any condensate water while lifting unit from window. Store parts WITH air conditioner. 4 ),*