Frigidaire FRA18EMU2 Complete Owner's Guide (English) - Page 7

Operating Instructions (continued) TO OPERATE ON FAN ONLY: Operating Instructions YOU WILL SEE: DO THIS: PRESS MODE BUTTON CHOOSE FAN ONLY TO USE THE ENERGY SAVER (ECON) FEATURE: Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Except "Auto Fan"). During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. YOU WILL SEE: SLEEP FEATURE: DO THIS: PRESS MODE BUTTON CHOOSE ECON Note: In this mode, the fan will continue to run for 1 minute after the compressor shuts off. The fan then cycles on for 20 seconds at 10 minute intervals until the room temperature is above the set temperature, at which time the compressor turns back on. YOU WILL SEE: DO THIS: PRESS SLEEP BUTTON 2009 Electrolux Home Products, Inc. Note: In this mode the selected temperature will increase by 2 °F 30 minutes after the mode is selected. The temperature will then increase by another 2 °F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the "Sleep" mode and the unit will continue to operate as originally programmed. The "Sleep" mode program can be cancelled at any time during operation by again pressing the "Sleep" button. All rights reserved. 7