Frigidaire FRQG7000LW Complete Owner's Guide (English) - Page 6

Cycle Selection, WARNING

Page 6 highlights

OPERATING INSTRUCTIONS This manual covers many models and not all cycles, options, or features listed are available on every model. Console shown above for reference only. Your model may differ. Cycle Selection Turn the cycle selector in either direction to the cycle desired. For best results Follow the fabric care label instructions on items to be dried. To change the cycle once it has begun, press the pause/ cancel button twice before selecting a new cycle. Just turning the cycle selector knob to another selection will not change the cycle. If the selection is changed after the cycle starts, the indicator lights will blink, and the signal will beep. The signal will beep and the status lights will flash, but the original cycle will continue. Auto Dry Cycles Auto Dry cycles take the guesswork out of selecting the correct drying time for each load. Moisture sensing bars at the back of the dryer drum sense the moisture level of the load as it tumbles through the heated air. With Auto Dry cycles, the load will automatically be dried at the selected temperature to the desired dryness level. Auto Dry cycles save time and energy and protect fabrics. When the load has reached the selected dryness level, it will continue to tumble during a cool down period. This helps reduce wrinkling and makes items easier to handle during unloading. Drying time varies depending on size and dampness of load and fabric type. If the load is too small or almost dry, the moisture sensing bars may not detect enough moisture to continue the cycle and the cycle may end after a few minutes. If this occurs, select a Timed Dry cycle. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time. towels Select this cycle to dry heavy loads such as towels and non-rubber-backed bath mats. normal Select this cycle to dry everyday fabrics including cottons, linens and sheets. casual Select this cycle to dry cottons, blends and permanent press items with a no-iron finish. delicates Select this cycle to dry knits and delicates. Timed Dry Cycles WARNING FIRE HAZARD To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastics similarly textured, rubber-like materials. Use a Timed Dry cycle and the air dry setting. touch up Select touch up to help remove wrinkles from clean and dry items that were not taken from the dryer at the end of the cycle, have been stored in crowded closets or drawers, or unpacked from luggage following a trip. It provides approximately 10 minutes of tumbling followed by a 5-minute cool down period. quick Select this timed cycle to quickly dry a small load made up of just a few items. It provides approximately 20 minutes of tumbling followed by a cool down period. timed dry To manually select the drying time for any load, turn the knob to a numbered setting. Drying times from 15 to 90 minutes are available in 15-minute increments. You will not be able to select a dryness level. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

6
OPERATING INSTRUCTIONS
Turn the cycle selector in either direction to the cycle
desired.
To change the cycle once it has begun, press the
pause/
cancel
button twice before selecting a new cycle. Just
turning the cycle selector knob to another selection will
not change the cycle. If the selection is changed after the
cycle starts, the indicator lights will blink, and the signal
will beep. The signal will beep and the status lights will
ash, but the original cycle will continue.
Auto Dry Cycles
Auto Dry cycles take the guesswork out of selecting the
correct drying time for each load. Moisture sensing bars
at the back of the dryer drum sense the moisture level of
the load as it tumbles through the heated air. With Auto
Dry cycles, the load will automatically be dried at the
selected temperature to the desired dryness level. Auto
Dry cycles save time and energy and protect fabrics.
When the load has reached the selected dryness level, it
will continue to tumble during a cool down period. This
helps reduce wrinkling and makes items easier to handle
during unloading.
Drying time varies depending on size and dampness of
load and fabric type. If the load is too small or almost
dry, the moisture sensing bars may not detect enough
moisture to continue the cycle and the cycle may end
after a few minutes. If this occurs, select a Timed Dry
cycle.
Room temperature and humidity, type of installation and
electrical voltage or gas pressure can also affect drying
time.
Cycle Selection
towels
Select this cycle to dry heavy loads such as towels and
non-rubber-backed bath mats.
normal
Select this cycle to dry everyday fabrics including
cottons, linens and sheets.
casual
Select this cycle to dry cottons, blends and permanent
press items with a no-iron
nish.
delicates
Select this cycle to dry knits and delicates.
Timed Dry Cycles
touch up
Select
touch up
to help remove wrinkles from clean
and dry items that were not taken from the dryer at the
end of the cycle, have been stored in crowded closets
or drawers, or unpacked from luggage following a
trip. It provides approximately 10 minutes of tumbling
followed by a 5-minute cool down period.
quick
Select this timed cycle to quickly dry a small load made
up of just a few items. It provides approximately 20
minutes of tumbling followed by a cool down period.
timed dry
To manually select the drying time for any load, turn the
knob to a numbered setting. Drying times from 15 to 90
minutes are available in 15-minute increments. You will
not be able to select a dryness level.
This manual covers many models and not all cycles, options, or features listed are available on every model. Console shown above
for reference only. Your model may differ.
Follow the fabric care
label instructions on
items to be dried
.
For best results
WARNING
FIRE HAZARD
To avoid
re hazard, do not use heat to dry items
containing feathers or down, foam rubber, plastics
similarly textured, rubber-like materials. Use a Timed
Dry cycle and the
air dry
setting.