Frigidaire FRQG7000LW Installation Instructions (All Languages) - Page 18

REVERSING DOOR Figure 1 1 Open door and remove four plugs in the door opening opposite the hinges. Retain all parts for use later, unless otherwise noted. (Figure 1). Figure 4 5 Remove two door handle screws and two hole plugs from door. (Figure 4) Figure 2 2 Begin removing the four screws that attach the hinge to the front panel. (Figure 2) Start by only removing one screw per hinge. Then only loosen the two remaining screws while firmly holding the door to prevent damage to hinge, front panel or door. After the remaining screws are loosened continue to remove all. Figure 5 6 Pull handle away from door assembly. (Figure 5) Figure 3 Figure 6 7 Separate the outer door from the inner door assembly with a putty knife or flat screw driver. (Figure 6) 3 Place door on a towel (handle side down) to prevent scratches to window. Remove all four remaining hinge screws on edge of door. (Figure 3) 4 Remove four screws from edge of door opposite hinges. 18