Frigidaire FRT15HB3JW Installation Instructions - Page 1

TO BE REMOVED BY THE CUSTOMER AFTER INSTALLATION IS COMPLETE INSTALLATION CHECKOFF LIST Doors Handles are secure and tight Door seals completely to cabinet on all sides Freezer door is level across the top Leveling Refrigerator is level, side to side and tilted 1/4" (6mm) front to back Toe grille is properly attached to refrigerator Cabinet is setting solid on all corners Electrical Power House power turned on Refrigerator plugged in Ice Maker House water supply connected to refrigerator No water leaks present at all connections - recheck in 24 hours Ice Maker is turned ON. Final Checks Shipping material removed Fresh Food and Freezer controls set Crisper Humidity controls set Registration Card sent in Refer to your Owner’s Use and Care Manual for additional information about your refrigerator. Tools You Will Need: Quvyyvƒ†™Ãurhq T‚pxr‡ X…rpuÃTr‡ 6qwˆ†‡hiyr X…rpu 25 "'µ Av‘rq X…rpu 1 HAND TRUCKING 2 SHIPPING MATERIAL 3 • Load refrigerator from side of cabinet only. • Do not run retaining straps over handles. • Do not over-tighten retaining straps. • Never use refrigerator handles to move the refrigerator. • Remove tape from doors only after unit is in place. Vvs‘iˆs†Âi€s ƒ‚ˆvsÂpiqyƒt ˆvs†st†wus†iˆƒ† ‘w€€Â9€wqy8‰””Âwt ˆvs‘iˆs†Âi€s w‡Âq€ƒ‡sr Dƒ‰‡s „€‰pw‚u €w‚s Yiˆs†€w‚sÂvƒƒy‰„ 8sÂqs†ˆiw‚ ˆvs‘iˆs†Âi€sÂw‡ ƒ„s‚Âi‚rˆvs†s i†s‚ƒÂ€siy‡ WATER SUPPLY 4 INSTALLATION CLEARANCES Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections: • Sides & Top..........3/8" • Back 1" NOTE: If you are installing your refrigerator beside a wall, leave 1/2" minimum between hinges and wall to allow for the door to swing open. 7 8 Remove Shipping material. (Features may vary per model.) Connect water supply - check for water leaks. Turn icemaker OFF if water supply is not connected immediately. Connecting to a reverse osmosis system is not recommended. 5 LEVELING AND ADJUSTING All four corners of refrigerator must rest firmly on a solid floor. Your refrigerator has adjustable rollers to help level it Toe Grille and to adjust the doors. To level cabinet or change door height: 1. Remove toe grille. 2. Use a screwdriver, 3/8" wrench, or nutdriver to adjust the rollers. To raise cabinet , turn screw clockwise. To lower cabinet, turn screw counterclockwise. Cabinet 6 When changing CONTROLS, wait 24 hours before making additional adjustments. If you need to remove the doors to get your refrigerator into the house please see "Door Removal and Reversal Instructions" in your Use & Care Manual. 9 √ See "Normal Operating Sights & Sounds" in the Use & Care Manual so you understand the sounds you may hear once your refrigerator is running. √ Please read entire Use & Care Manual to become aware of important safety instructions and to become familiar witrh your new refrigerator. √ Send in Registration card to register your refrigerator. Ensure icemaker to turned ON. √ Congratulations! You are ready to enjoy your new refrigerator. IF YOU ARE DISSATISFIED WITH THE INSTALLATION, PLEASE CALL THE STORE YOU PURCHASED IT FROM. P/N: 240568300