Frigidaire FRYB4623AS Complete Owners Guide - Page 5

Reversing the door swing, Step 9:Change the hinge axis, from the right hol

Page 5 highlights

INSTALLATION Reversing the door swing The glass door can be opened from left to right and vice versa. Should you desire to change the opening direction, please follow these instructions. 4. Remove three screws that hold the bottom hinge to lower end of cabinet. Remove the three button plugs from lower LH corner and transfer to holes where bottom hinge was just removed.  NOTE All parts removed must be saved to do the reinstallation of the door. 1. Remove top cap. Remove the three screws that hold the upper hinge (right side) to the top of the cabinet. Carefully remove top hinge. 5. Unscrew pins from both hinges and transfer to threaded hole on opposite side. Re-install bottom hinge in LH corner of cabinet using same three screws removed in Step 4. Chart 6 on the bottom of the 2. Lift the door up off of bottom hinge and place it on a padded surface to prevent scratching it. 6. On bottom edge of door, transfer door stop bracket and bushing to holes on opposite side. 7. On top edge of door, transfer the button plugs and bushing to hole on opposite side. 3. Remove the three button plugs from the upper left corner of the cabinet and transfer them to the holes on the opposite side. Be sure to press the button plugs firmly into the holes. 8. SPtleacpe9b:oCtthomanLgHecotfhrrnoeemrhoitnfhgdeoeoriragoxhnitstohloolweerto lef hinge, then install top hinge to cabinet. Make sure door is level and it seals properly against cabinet, then securely fasten three screws. Snap top cap back onto hinge. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

5
INSTALLATION
Reversing the door swing
The glass door can be opened from left to right
and vice versa. Should you desire to change the
opening direction, please follow these instructions.
NOTE
All parts removed must be saved to do the
reinstallation of the door.
1. Remove top cap. Remove the three screws
that hold the upper hinge (right side) to
the top of the cabinet. Carefully remove
top hinge.
Step 9:Change the hinge axis
°
from the right hol
2.
Lift the door up off of bottom hinge and
place it on a padded surface to prevent
scratching it.
3. Remove the three button plugs from
the upper left corner of the cabinet
and transfer them to the
holes on the
opposite side. Be sure to press the button
plugs firmly into the holes.
4. Remove three screws that hold the bottom
hinge to lower end of cabinet. Remove the
three button plugs from lower LH corner
and transfer to holes where bottom hinge
was just removed.
Chart 6
on the bottom of the
5. Unscrew pins
from both hinges
and transfer to
threaded hole
on opposite side.
Re-install bottom
hinge in LH corner
of cabinet using
same three screws
removed in Step 4.
6. On bottom edge of door, transfer door
stop bracket and bushing to holes on
opposite side.
7. On top edge of door, transfer the button
plugs and bushing to hole on opposite side.
8. Place bottom LH corner of door onto lower
hinge, then install top hinge to cabinet.
Make sure door is level and it seals
properly against cabinet, then securely
fasten three screws. Snap top cap back
onto hinge.