Frigidaire GLEB30T9FB User Guide - Page 2

Setting the Clock - appliances

Page 2 highlights

Setting the Clock The Clock pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the wall oven is first plugged in, or when the power supply to the appliance has been interrupted, the timer in the display will flash along with "PF" (power failure, See Fig. 1). When PF appears in the display and 12:00 is flashing, press Clear /Off . A beep will sound and PF will disappear. INSTRUCTIONS PRESS To set the clock (example below for 1:30) 1. Press Clock . "CLO" and the current time of day will Clock appear in the display (Fig. 2). 2. Press 1 3 0 pads to set the time of day to 1:30 1 30 (Fig. 3). Press START . The time of day will appear in the display (Fig. 4). Changing between 12 or 24 hour time of day display 1. Press and hold Clock for 6 seconds. "CLO" and the current time of day will appear in the display (Fig. 3). A beep will sound and "12h" (Fig. 5) or "24h" (Fig. 6) will appear in the display. 2. Press Clean to switch between the 12 and 24 hour time of day display. The display will show either "12h" (Fig. 5) or "24h" (Fig. 6). 3. Press START to accept the change or press Clear /Off to reject the change. 4. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours. START Clock for 6 seconds Clean START or Clear /Off UPPER ROAST LOCKED WARM BAKE DELAY CONV BROIL TIMED UPPER TIMER REMOVE LOWER DOOR RACKS CLEAN CONV BROIL TIMED WARM BAKE DELAY LOWER ROAST LOCKED Fig. 1 DISPLAY UPPER WARM ROAST BAKE LOCKED DELAY CONV BROIL TIMED UPPER TIMER REMOVE LOWER DOOR RACKS CLEAN Fig. 2 CONV BROIL TIMED WARM BAKE DELAY LOWER ROAST LOCKED UPPER ROAST LOCKED WARM BAKE DELAY CONV BROIL TIMED UPPER TIMER REMOVE LOWER DOOR RACKS CLEAN Fig. 3 CONV BROIL TIMED WARM BAKE DELAY LOWER ROAST LOCKED UPPER WARM ROAST BAKE LOCKED DELAY CONV BROIL TIMED UPPER TIMER REMOVE LOWER DOOR RACKS CLEAN Fig. 4 CONV BROIL TIMED WARM BAKE DELAY LOWER ROAST LOCKED UPPER WARM ROAST BAKE LOCKED DELAY CONV BROIL TIMED UPPER TIMER REMOVE LOWER DOOR RACKS CLEAN Fig. 5 CONV BROIL TIMED WARM BAKE DELAY LOWER ROAST LOCKED UPPER WARM Fig. 6 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

2
Setting the Clock
INSTRUCTIONS
PRESS
DISPLA
Y
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
WARM
The
Clock
pad is used to set the clock. The clock may be set for 12 or 24 hour time of
day operation. The clock has been preset at the factory for the 12 hour operation.
When the wall oven is first plugged in, or when the power supply to the appliance has
been interrupted, the timer in the display will flash along with
"PF"
(power failure, See
Fig. 1).
When
PF
appears in the display and 12:00 is flashing, press
Clear
/Off
.
A beep will sound
and
PF will disappear.
To set the clock (example below for 1:30)
1.
Press
Clock
.
"CLO"
and the current time of day will
appear in the display (Fig. 2).
2.
Press
1
3
0
pads to set the time of day to 1:30
(Fig. 3). Press
START
. The time of day will appear in
the display (Fig. 4).
Changing between 12 or 24 hour time of day
display
1.
Press and hold
Clock
for 6 seconds.
"CLO"
and the
current time of day will appear in the display (Fig. 3). A
beep will sound and
"12h"
(Fig. 5) or
"24h"
(Fig. 6) will
appear in the display.
2.
Press
Clean
to switch between the 12 and 24 hour time
of day display. The display will show either
"12h"
(Fig.
5) or
"24h"
(Fig. 6).
3.
Press
START
to accept the change or press
Clear
/Off
to
reject the change.
4.
Reset the correct time as described in
To set the
Clock
above. Please note that if the 24 hour time of
day mode was chosen, the clock will now display time
from 0:00 through 23:59 hours.
Clock
1
3
0
START
Clock
for 6 seconds
Clean
START
or
Clear
/Off