Frigidaire GLEFZ389HC Use and Care Guide - Page 28
Adjusting Your Oven Temperature, Self-Cleaning
View all Frigidaire GLEFZ389HC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Self-Cleaning INSTRUCTIONS When the Self-Clean cycle is done: 1. The time of day,"Hot, DOOR LOCKED" and "CLEAN" icon will remain in the display (See Fig. 7). 2. Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened. Stopping or Interrupting a Self-Cleaning cycle: If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven: 1. Press . 2. Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED" icon is no longer displayed,the oven door can then be opened (Fig. 8). PRESS DISPLAY Fig.7 Fig.8 IMPORTANT NOTES when using the Self-Clean feature: 1. The Self-Clean feature will not operate whenever a radiant surface remains ON. 2. A Self-Clean cycle cannot be started if Oven Lockout feature is active. 3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly cleaned. Once power is restored, the Cooktop will remain locked. To unlock the cooktop press and hold the pad for 3 seconds. The red cooktop lock icon will disappear from the display. Then set for another Self-Clean cycle to finish. 4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for a delayed Self-Cleaning cycle 12-24 hours in advance see page 12 for instructions to set the control for the 24 hour time of day display mode. Adjusting Your Oven Temperature The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed. INSTRUCTIONS PRESS Note: The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature. DISPLAY To adjust the oven temperature higher: 1. Press for 6 seconds (Fig. 1). 2. To increase the temperature use the number pads to enter the Fig. 1 desired change. (Example 30°F) (Fig. 2). The temperature may be increased as much as 35°F (19°C). Fig. 2 28