Frigidaire GLGT1031FS Operating Instructions (Operating Instructions) - Page 3

Before Operating Your Washer, Operating Steps, Cycle Selection, LAUNDRY CENTER WASHER, OPERATING,

Page 3 highlights

LAUNDRY CENTER WASHER OPERATING INSTRUCTIONS WASH/RINSE TEMPERATURE COLD WARM WARM * COLD • COLD COLD HOT COLD WARM COLD LOAD SLIOZEAD(WSAIZTER LEVEL) SMALL (LOW) MEDIUM LARGE (FULL) RESET * * SOME MODELS SOAK/ PREWASH PREWASH 15 12 8 4 REGULAR/WHITES SOAK FINAL SPIN RINSE KNITS/ DELICATES RINSE FINAL SPIN 12 8 4 6 RINSE FINAL SPIN PERM PRESS/COLORS Before Operating Your Washer Read your Washer Owner's Guide. It has important safety and warranty information. It also has many suggestions for best washing results. To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your Washer Owner's Guide before operating this appliance. Operating Steps Read Washing Procedures in your Owner's Guide. It explains these operating steps in detail. 1. Sort laundry into loads that can be washed together. 2. Prepare items for washing. 3. Pretreat stains and heavy soil. 4. Add the measured amount of detergent to wash tub before adding the laundry load. 5. If desired, add liquid bleach to bleach dispenser. DO NOT pour bleach directly onto the load. Printed in U.S.A. 6. If desired, add liquid fabric softener to fabric softener dispenser. DO NOT pour fabric softener directly onto wash load. 7. Add laundry load loosely to wash tub. Dry load should not be higher than top of agitator vanes. For best results, DO NOT overload. 8. Select the wash cycle and settings according to type, size and soil level of each load. 9. Close lid and pull out Cycle Selector knob to start washer. The washer will not fill with water, agitate or spin when the lid is open, and will only start to do so if the lid is closed. To stop the washer, push in the Cycle Selector knob. To change a cycle, push in the Cycle Selector knob and turn it clockwise to the desired setting. Pull out the knob to restart the washer. 10. Remove items at end of cycle. Wait about 2-3 minutes for safety lid lock to release. Cycle Selection Push in and turn the Cycle Selector knob clockwise to the desired cycle. For best results, follow the washing instructions on the fabric care labels. The Whites, Colors and Knits/Delicates cycles progress through wash agitation, drain and spin with a spray rinse, rinse agitation, and a final spin. Whites Cycle This cycle provides up to 15 minutes of normal agitation and a fast spin for most fabrics. Colors Cycle This cycle provides up to 12 minutes of normal agitation and a fast spin for cottons and blends with a no-iron finish. A cool down spray rinse helps reduce wrinkling. P/N 137227300 (0905)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

P/N 137227300 (0905)
Printed in U.S.A.
Before Operating Your Washer
Read your Washer Owner's Guide.
It has important safety
and warranty information. It also has many suggestions for
best washing results.
To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
in your Washer Owner's Guide before operating this appliance.
Operating Steps
Read Washing Procedures in your Owner's Guide.
It
explains these operating steps in detail.
1.
Sort laundry into loads that can be washed together.
2.
Prepare items for washing.
3.
Pretreat stains and heavy soil.
4.
Add the measured amount of detergent to wash tub
before adding the laundry load.
5.
If desired, add liquid bleach to bleach dispenser.
DO
NOT pour bleach directly onto the load.
6.
If desired, add liquid fabric softener to fabric softener
dispenser.
DO NOT pour fabric softener directly onto
wash load.
7.
Add laundry load loosely to wash tub.
Dry load
should not be higher than top of agitator vanes.
For
best results, DO NOT overload.
8.
Select the wash cycle and settings according to type,
size and soil level of each load.
9.
Close lid and pull out Cycle Selector knob to start
washer.
The washer will not fill with water, agitate or
spin when the lid is open, and will only start to do so if
the lid is closed.
To stop the washer, push in the Cycle Selector knob.
To
change a cycle, push in the Cycle Selector knob and turn
it clockwise to the desired setting.
Pull out the knob
to
restart the washer.
10.
Remove items at end of cycle.
Wait about 2-3 minutes
for safety lid lock to release.
Cycle Selection
Push in and turn the Cycle Selector knob clockwise to the
desired cycle.
For best results, follow the washing
instructions on the fabric care labels.
The Whites, Colors and Knits/Delicates cycles progress
through wash agitation, drain and spin with a spray rinse,
rinse agitation, and a final spin.
Whites Cycle
This cycle provides up to 15 minutes of normal
agitation and
a fast spin for most fabrics.
Colors Cycle
This cycle provides up to 12 minutes of normal
agitation and
a fast spin for cottons and blends with a no-iron finish.
A
cool down spray rinse helps reduce wrinkling.
LAUNDRY CENTER WASHER
OPERATING
INSTRUCTIONS
±²³´´
µ´¶·¸
´³¹º»¼µ½¾´´¸
³Æ»È´
ÐÀ
м
Ñ
¿
³´ÍĹóʺËÆÅ´È
´¶³À¼±Á»¼µ·³Ã»¹¼´»Ä»´¸
ŶÃ
ƶ´À
·³¹²
·³¹²
ƶ´À
ƶ´À
·³¹²
ƶ´À
·³±ÅǹÁȱ»¼Ã»²É»¹³Ã¾¹»
ȲÃÉÊ
dz´ºÃÈË
Ç´³±
dz´ÈÈʸ²¹²³È
м
Ñ
¿
¹»±»Ã
²»ÀÁ¾²
³Æ»È´
ÌƻùµÈÇÆ»
Ȳ±´µ±²¶´¹È
Ê
Ê
Ê
ȲÃÉ
dz´ºÃÈË
ÌƻùµÈÇÆ»
Á
É»ÆÅÈÊ
¶´¹Æ¸ÃÅ´È
ÌƻùµÈÇÆ»
³Æ»È´
COLD
COLD
LOAD SIZE