Frigidaire GLTF2940FB Owners Guide - Page 4

Important Safety Instructions (continued) Avoid fire hazard or electrical shock. Do not use an adaptor plug or extension cord or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death. Grounding type wall receptacle Do not under any circumstances, cut, remove, or bypass the grounding prong from this plug. Prevent Injury To prevent shock hazard and assure stability during operation, the washer must be installed and electrically grounded by a qualified service person in accordance with local codes. Installation instructions are packed in the washer for installer's reference. Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. If the washer is moved to a new location, have it checked and reinstalled by a qualified service person. To prevent personal injury or damage to the washer, the electrical power cord of the washer must be plugged into a properly grounded and polarized 3-prong outlet. The third grounding prong must never be removed. Never ground the washer to a gas pipe. Do not use an extension cord or an adaptor plug. Follow package directions when using laundry products. Incorrect usage can produce poisonous gas--resulting in serious injury or death. • Do not combine laundry products for use in 1 load unless specified on the label. • Do not mix chlorine bleach with ammonia or acids such as vinegar. Power supply cord with 3-prong grounding plug CORRECT Use this way ONLY Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death. To prevent serious personal injury and damage to the washer: • All repairs and servicing must be performed by an authorized servicer unless specifically recommended in this Owner's Guide. Use only authorized factory parts. • Do not tamper with controls. • Do not install or store the washer where it will be exposed to the weather. • Do not install on carpet. Install washer on a solid floor. It may be necessary to reinforce the floor to prevent vibration or movement. To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. To prevent injury, do not reach into the washer while parts are moving. Before loading, unloading or adding items, push in the cycle selector knob and allow the drum to coast to a complete stop before reaching inside. Failure to comply with these warnings could result in serious personal injuries. Note: The instructions appearing in this Owner's Guide are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance. This washer is equipped with an electrical overload protector. The motor will stop if it becomes overheated. The washer will automatically restart after a cool down period of up to 30 minutes, if the washer has not been manually turned off during this time. SAVE THESE INSTRUCTIONS ENERGY STAR 4 As an ENERGY STAR ® Partner, Electrolux Home Products has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.