Frigidaire GRSC2352AD Complete Owners Guide - Page 17

17 CONTROLS AND SETTINGS 6 Adjusting Temp Illuminates when temperatures are changed on the display and will remain illuminated until the desired temperatures are reached inside the refrigerator and freezer. Press either the + or - to adjust to desired temperature setting. Freezer temp Control temperatures range from -6°F / -21°C to +4°F / -15°C. Refrigerator temp The Control temperature ranges from +33°F / +1°C to +43°F / +7°C. This unit is designed to operate at 39°F refrigerator/0°F freezer. The unit should stabilize temperatures within 24 hours of installation. 7 Door Open Illuminates whenever the doors are open. If a door is left open for 5 minutes or more, an alarm will sound and the display will be illuminated until the doors are shut. Pressing any button will mute the alarm temporarily. Check to make sure no food is blocking the doorway. 8 Replace Water Filter Display illuminates every 6 months or when filter needs replacing. Replace filter and then press and hold Reset Water Filter for 3 seconds to deactivate warning on display. See "Replacing the Filter" section for more information. 9 Replace Air Filter Display illuminates every 6 months or when filter needs replacing. Replace filter and then press and hold Reset Air Filter for 3 seconds to deactivate warning on display. See "Replacing the Filter" section for more information. 10 Water Press Water to dispense water. An indicator light will be illuminated above the active feature. 11 Cube Press Cube to dispense cubed ice. An indicator light will illuminate above the active feature. 12 Crush Press Crush to dispense crushed ice. An indicator light will illuminate above the active feature. 13 °F/°C To toggle between Fahrenheit (°F) and Celsius (°C), simultaneously press and hold + and - for 5 seconds on refrigerator side of display. 14 Chill Boost Chill Boost is a faster rate for chilling food in the refrigerator compartment. Use this feature when loading several items into the refrigerator at one time. Deactivates after 6 hours. 15 Air Filter The display shows the current status of the air filter (Good, Order, or Replace). To reset the filter status to Good, press and hold Air Filter for 3 seconds. 16 Water Filter The display shows the current status of the water filter (Good, Order, or Replace). To reset the filter status to Good, press and hold Water Filter for 3 seconds. 17 Toggles dispenser light On and Off. Alarms Power Outage Door Open In the event of a power outage, the Power Outage alert will illuminate once power has been restored and a tone will sound. Press any button to silence the tone. If you leave a door open for 5 minutes or more, an alarm will sound and the Door Open indicator will illuminate on the display. Turn the alarm off by closing the door or pressing any key. The control panel will return to normal operations after you close the door.