Frigidaire PHT219JSM Use and Care Guide - Page 11
Looking Inside
View all Frigidaire PHT219JSM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
LOOKING INSIDE CAUTION To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. SHELF ADJUSTMENT Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting the shelves, remove all food. To adjust sliding shelves: 1 Remove shelf by pulling forward to stop position. 2 Lift front edge up and pull out. Replace the shelf on any pair of rails by reversing this procedure. DOOR STORAGE Door bins, shelves, and racks are provided for convenient storage of jars, bottles, and cans. Frequently used items can be quickly selected. Some models have door racks or bins that can accommodate gallon-sized plastic drink containers and economy-sized jars and containers. Some racks are adjustable for maximum storage capacity. The dairy compartment, which is warmer than the general food storage section, is intended for short term storage of cheese, spreads, or butter. Door Rack Sliding Glass Shelf To adjust cantilever shelves: NOTE Sliding Wire Shelf Cantilever shelves are supported at the back of the refrigerator. Cantilever shelves are available in either glass or wire. 1 Lift front edge up. 2 Pull shelf out. Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position. SpillSafeTM glass shelves (some models) catch and hold accidental spills. In some models, the SpillSafeTM shelves slide out for easy access to food and for fast cleaning. The shelves slide out independently of the cantilever brackets. Just pull the front of the shelf forward. The shelf can be extended as far as the stopper will allow but it is not removable from the cantilever bracket. ADJUSTABLE DOOR BINS Some models have adjustable door bins that can be moved to suit individual needs. To move door bins 1. Lift bin straight up. 2. Remove bin. 3. Place bin in desired position. 4. Lower bin onto supports until locked in place. Adjustable Door Bin Bin Liner (Some models) TALL BOTTLE RETAINER (SOME MODELS) The Tall Bottle Retainer keeps tall containers in the bin from falling forward when opening or closing the refrigerator door. To install, hold the retainer at the top, and slide it over the outside wall of the bin, as shown in the diagram. The Tall Bottle Retainer works best with a Bin Snugger. Full Width Cantilever Glass Shelf Cantilever Glass Shelf Fixed and Sliding 11 Tall Bottle Retainer (left) and Bin Snugger (right)