Frigidaire PLFU1778ES Use and Care Manual - Page 5

Looking Inside, Food Storage And, Energy Saving Tips - freezer

Page 5 highlights

LOOKING INSIDE INTERIOR LIGHTING The lights comes on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Replace the old bulb with a bulb of the same wattage. SLIDE-OUT BASKET A Slide-Out Basket located at the bottom of the freezer, provides separate storage space for items that are difficult to store on freezer shelves. To remove the basket, pull out and lift up. MID LEVEL LIGHTING The lights comes on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Remove the lens from the lamp housing by unsnapping it from the lamp housing using your fingers or a screwdriver. Be careful not to break the locking tabs on the lamp housing. Replace the old bulb with a bulb of the same type and wattage. To replace the lens, snap one side of the lens opening to the tab on the lamp housing. Then carefully attach the other side. TILT-OUT SHELF This shelf is located inside on the freezer door and provides additional storage space. To access an item, tilt top of "basket" shelf down. ADJUSTABLE INTERIOR SHELVES Multi-position adjustable interior shelves can be moved to any position for larger or smaller packages. The shipping spacers that stabilize the shelves for shipping may be removed and discarded. TO ADJUST CANTILEVER SHELVES NOTE Full Width Cantilever Glass Shelf Cantilever shelves are supported at the back of the freezer. FOOD STORAGE AND ENERGY SAVING TIPS • The freezer should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of direct sunlight. • Let hot foods cool to room temperature before placing in the freezer. Overloading the freezer forces the compressor to run longer. Foods that freeze too slowly may spoil or lose quality. • Be sure to wrap foods properly, and wipe containers dry before placing them in the freezer. This cuts down on frost build-up inside the freezer. • Freezer shelves should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the freezer less efficient. • Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible. VACATION AND MOVING TIPS 1 Lift front edge up. 2 Pull shelf out. Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position. Short Vacations: Leave the freezer operating during vacations of less than three weeks. Long Vacations: If the freezer will not be used for several months: • Remove all food and unplug the power cord. • Clean and dry the interior thoroughly. • Leave the freezer door open slightly, blocking it open if necessary, to prevent odor and mold growth. FI5RST

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

FI
5
RST
INTERIOR LIGHTING
The lights comes on automatically when the door is opened. To
replace the light bulb, turn the temperature control to OFF and
unplug the electrical cord.
Replace the old bulb with a bulb of
the same wattage.
ADJUSTABLE INTERIOR
SHELVES
Multi-position adjustable interior
shelves can be moved to any
position for larger or smaller
packages. The shipping spacers
that stabilize the shelves for
shipping may be removed and
discarded.
TO ADJUST CANTILEVER
SHELVES
1
Lift front edge up.
2
Pull shelf out.
NOTE
NOTE
NOTE
NOTE
NOTE
Cantilever shelves are supported at the back of the freezer.
Replace the shelf by
inserting the hooks at rear of
the shelf into the wall
bracket. Lower the shelf into
the desired slots and lock
into position.
SLIDE-OUT BASKET
A Slide-Out Basket located at
the bottom of the freezer,
provides separate storage
space for items that are difficult
to store on freezer shelves. To
remove the basket, pull out and
lift up.
MID LEVEL LIGHTING
The lights
comes on automatically when the door is opened. To
replace the light bulb, turn the temperature control to OFF and
unplug the electrical cord
. Remove the lens from the lamp housing
by unsnapping it from the lamp housing using your fingers or a
screwdriver. Be careful not to break the locking tabs on the lamp
housing. Replace the old bulb with a bulb of the same type and
wattage. To replace the lens, snap one side of the lens opening to
the tab on the lamp housing. Then carefully attach the other side.
The freezer should be located in the coolest
area of the room, away from heat producing
appliances or heating ducts, and out of
direct sunlight.
Let hot foods cool to room temperature
before placing in the freezer. Overloading
the freezer forces the compressor to run longer. Foods that
freeze too slowly may spoil or lose quality.
Be sure to wrap foods properly, and wipe containers dry
before placing them in the freezer. This cuts down on
frost build-up inside the freezer.
Freezer shelves should not be lined with aluminum foil,
wax paper, or paper toweling. Liners interfere with cold
air circulation, making the freezer less efficient.
Organize and label food to reduce door openings and
extended searches. Remove as many items as needed
at one time, and close the door as soon as possible.
TILT-OUT SHELF
This shelf is located
inside on the freezer
door and provides
additional storage
space. To access an
item, tilt top of “basket”
shelf down.
VACATION AND MOVING TIPS
Short Vacations:
Leave the freezer operating during vacations of less
than three weeks.
Long
Vacations:
If the freezer will not be used for several months:
Remove all food and unplug the power cord.
Clean and dry the interior thoroughly.
Leave the freezer door open slightly, blocking it open if
necessary, to prevent odor and mold growth.
LOOKING INSIDE
FOOD STORAGE AND
ENERGY SAVING TIPS