Frigidaire PLGFMZ98GC Use and Care Manual - Page 10

Setting Oven Controls Setting Continuous Bake or 12 Hour Energy Saving The TIMER ON/OFF and CLEAN pads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking. INSTRUCTIONS PRESS DISPLAY To set the control for Continuous Bake or 12 Hour Energy Saving features: 1. Press and hold for 6 seconds (Fig.1) for 6 seconds Fig. 1 2. Press to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12 Hh" (Fig. 2) in the display indicates the control is set for 12 Hour Energy Saving feature and "- - h" (Fig. 3) indicates the control is set for the Continuous Fig. 2 Bake feature. 3. Press to accept the change (Fig. 4) display will return to or time of day) or press to reject the change. Fig. 3 Setting Kitchen Timer Fig. 4 The TIMER ON/OFF pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 8 for time amount settings. INSTRUCTIONS PRESS DISPLAY To set the Kitchen Timer (example for 5 minutes): 1. Press . (Fig. 5). 2. Press the number pads to set the desired time in the display (example ). Press . (Fig. 6). Fig. 5 Note: If is not pressed the timer will return to the time of day. 3. When the set time has run out, "End" and "TIMER" will show in Fig. 6 the display (Fig. 7). The clock will sound with 3 beeps every 15 seconds until is pressed. To cancel the Kitchen Timer before the set time has run out: Press . The display will return to the time of day. Fig. 7 10