Frigidaire PLRH1779GS Use and Care Guide - Page 6

Refrigerator Features Interior Light The light comes on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Replace the old bulb with a bulb of the same wattage. to adjust cantilever shelves NOTE Cantilever shelves are supported at the back of the refrigerator. Drawer with adjustable dividers The drawer, located at the bottom of the refrigerator, provides separate storage space for items that are difficult to store on refrigerator shelves. Dividers may be adjusted for different size items within the drawer. Tilt-out Shelf This shelf is located inside on the refrigerator door and provides additional storage space. To access an item, tilt top of "basket" shelf down. 1 Lift front edge up. 2 Pull shelf out. Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position. 1 2 mid level light The light comes on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Remove the lens from the lamp housing by unsnapping it from the lamp housing using your fingers or a screwdriver. Be careful not to break the locking tabs on the lamp housing. Replace the old bulb with a bulb of the same type and wattage. To replace the lens, snap one side of the lens opening to the tab on the lamp housing. Then carefully attach the other side. Adjustable Interior Shelves Multi-position adjustable interior shelves can be moved to any position for larger or smaller packages. The shipping spacers that stabilize the shelves for shipping may be removed and discarded. Lift up and out Adjustable Interior Shelves - Upright Models CAUTION To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. 6