Frigidaire PMBD3080AF Installation Instructions - Page 5

BUILT-IN CONVECTION MICROWAVE INSTALLATION INSTRUCTIONS 4. Install Mounting Screws The microwave oven can tip when the door is open. The mounting screws supplied with the microwave oven must be installed to prevent tipping of the microwave oven and injury to persons. 1. The mounting holes in the side trims may be used as a template to locate the appliance mounting screw holes (see figure 5). 2. Use the two screws supplied to fix the appliance to the cabinet. Mounting Holes 6. Model and Serial Number Location The serial plate is located along the interior side trim of the oven and visible when the door is open. When ordering parts for or making inquiries about your microwave oven, always be sure to include the model and serial numbers and a lot number or letter from the serial plate. Serial Plate Figure 5: Mounting Screw Holes Figure 7: Serial Plate Location 5. Minimum Cutout Overlap 28" 1-5/16" min cutout 1/8" Figure 6: Minimum cutout overlap Before You Call for Service 17-3/4" min cutout Read the "Before You Call for Service Checklist" and the "Operating Instructions" in your Use and Care Guide: it may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Refer to your Use and Care Guide for service phone numbers. 15/16" 5