Frigidaire UMV1422US Installation Instructions - Page 5
TOOLS YOU WILL NEED, Installation Instructions - 24
View all Frigidaire UMV1422US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation Instructions TOOLS YOU WILL NEED # 1 Phillips screwdriver Pencil Ruler or tape measure and straight edge Carpenter square (optional) Tin snips (for cutting damper, if required) Gloves Scissors (to cut template, if necessary) Electric drill with 3⁄16", 1⁄2" and 5⁄8" drill bits Filler blocks or scrap wood pieces, if needed for top cabinet spacing (used on recessed bottom cabinet installations only) Saw (saber, hole or keyhole) Stud finder or Hammer (optional) Safety goggles Level Duct and masking tape MOUNTING SPACE 16 1⁄2" (41.9 cm) 13"Maximum (33 cm) 24" (61.0cm) 2" (5.1 cm) 30" (76.2 cm) min. Bottom Edge of Cabinet Needs to be 30"" (76.2 cm) or More from the Cooking Surface Backsplash 66w (167.6 cm) or More from the Floor to the Top of the Microwave NOTES: • The space between the cabinets must be 24" (61.0cm)wide and free of obstructions. • If you are going to vent your microwave oven to the outside, see Hood Exhaust Section for exhaust duct preparation. • When installing the microwave oven beneath smooth, flat cabinets, be careful to follow the instructions on the top cabinet template for power cord clearance. • As a guide to installation, see page 24 for Mounting Template Information. • If the cabinet depth including the cabinet doors is more than 13'" ' then the unit must be spaced out from wall using adequate materials supporting 150 Ibs to allow proper top vent air exhaust/intake. Cabinet Cabinet EN-5