Fujitsu 5120C Operator's Guide - Page 19
Indications on the Function Number display - fi driver
View all Fujitsu 5120C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
fi-5120C / fi-5220C Image Scanner Operator Guide TROUBLE SHOOTING CONTENTS MAP TOP The operator panel is located on the right side of the scanner. This panel comprises of a Function Number display, four buttons and a LED. No. Name 1 Function Number display 2 Function Button 3 Send to Button 4 Scan Button 5 Power Button 6 LED Function Indicates the function Number and error status. Changes the Function activated by the Send to button (*). Launches the linked application software (*). Turns the scanner ON and OFF. Lights when the scanner is turned ON. *About the settings on the launcher, refer to FUJITSU TWAIN32 scanner driver help. Indication Function 8 Blinks only one time upon turning on the scanner. P Indicates that the scanner has been turned ON and is being initialized. 0 Indicates that initialization will soon end. 1 Indicates that initialization has ended successfully. The scanner is now in "Ready Status". Indicates that a temporary error occurred when documents were being scanned. A U number appearing in alternation following the U (i.e., 1 or 2, etc.) refers to the type of error. To return the scanner to the ready status ("1"), press "Scan" or "Send to" button. Indicates that a device (hardware) alarm has occurred during scanning of documents. "E" and the alarm Number (0 to 9, A,c,d and F) will appear alternately. E To return the scanner to the ready status ("1"), press "Scan" or "Send to" button. If this alarm occurs, turn the power off and on again. If the alarm continues after turning the power on again, contact your service engineer.