Fujitsu 5750C Operator's Guide - Page 138
Online setup
UPC - 097564307232
View all Fujitsu 5750C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Introduction CONTENTS 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.6 Resetting the consumables counters 7.7 Adjusting the offset 7.8 Adjust the magnification 7.9 Power saving 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix 7.1 Online setup "Software Operation Panel" is an application program that is installed with driver software (TWAIN/ISIS). This software allows you to configure various settings for fi-5750C with user-friendly interfaces. To start this application, select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. Details of settings are as follows: No Function Description 1 Double feed Specifies double feed detection method. The scanner monitors differences in document length, overlapping or both, for detecting double-feeds. Specifies area to be erased from 2 Page Edge Filler(ADF) image margins when scanning documents with the ADF. Specifies area to be erased from 3 Page Edge Filler(FB) image margins when scanning documents with the Flatbed. Settings None / Check Overlapping / Check Length / Check overlapping and length For setting the length difference detection, select 15 / 10 / 20mm Default None Top/Bottom/Right/Left: set the value from Top/Bottom/Right/Left: 0 to 15mm (can be changed by 1mm) 0mm Top/Bottom/Right/Left: set the value from Top/Bottom/Right/Left: 0 to 15mm (can be changed by 1mm) 0mm 1 | 2 All Rights Reserved, Copyright (C) PFU LIMITED 2003