Fujitsu A1130 A1130 User's Guide - Page 91
Shutdown and Startup Problems, Problem, Possible Cause, Possible Solutions
UPC - 611343085809
View all Fujitsu A1130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Problem Possible Cause Possible Solutions The battery seems to discharge too quickly. (continued) The battery is very old. Replace the battery. The battery has been Replace the battery. exposed to high temperatures. The battery is too hot or too cold. Shutdown and Startup Problems Restore the notebook to normal operating temperature. Charging icon on the Status Indicator panel will flash when battery is outside of operating range. The Suspend/Resume but- Suspend/Resume ton does not work. button is disabled. Select the "Choose what the power button does" option. There may be application software. conflict Close all applications and try the button again. The system powers up, and displays power on information, but fails to load the operating system. The boot sequence settings of the setup utility are not compatible with your configuration. Set the operating source by pressing the [ESC] key while the Fujitsu logo is on screen or use the [F2] key and enter the setup utility and adjust the source settings from the Boot menu. See "BIOS Setup Utility" on page 42. You have a secured system requiring a password to load your operating system. Make sure you have the right password. Enter the setup utility and verify the Security settings and modify them as accordingly. See "BIOS Setup Utility" on page 42. Internal hard drive was Use the BIOS setup utility or Primary Master submenu, located not detected. within the Main menu, to try to auto detect the internal hard drive. An error message is displayed on the screen during the notebook (boot) sequence. Power On Self Test (POST) has detected a problem. See the Power On Self Test (POST) messages to determine the meaning and severity of the problem. Not all messages are errors; some are simply status indicators. See "Power On Self Test Messages" on page 90. 86 - Troubleshooting