Fujitsu MBA3300NC Product Manual - Page 33
SCSI Function Specifications, LVD type Low Voltage Differential - jumpers
View all Fujitsu MBA3300NC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2.2 SCSI Function Specifications Table 2.4 shows the SCSI functions provided with the HDD. Table 2.4 SCSI function specifications Item Specification Single-ended type Ο HVD type (High Voltage Differential) × Electrical LVD type (Low Voltage Differential) Ο requirements Single-ended type (*1) Position where the terminating resistor is mounted on the PCA × Differential type Position where the terminating resistor is mounted on the PCA × TERMPWR signal send function Ο (NP model) Connector 68-pin P cable connector 80-pin SCA2 connector Ο (NP model) Ο (NC model) Data bus parity (Data bus CRC) Ο Bus arbitration function Ο Disconnection/reconnection function Ο Addressing SCSI ID 16-bit SCSI LUN (logical unit number) 8-bit SCSI (Single-ended type) Data transfer (Synchronous mode) (*2) (Ultra 2 type) 16-bit SCSI (Single-ended type) (Ultra 2 Wide type) (U160 LVD type) (U320 LVD type) #0 to #15 (Jumper selection, NP model) #0 fixed Ο 20 MB/s max. Ο 40 MB/s max. Ο 40 MB/s max. Ο 80 MB/s max. Ο 160 MB/s max. Ο 320 MB/s max. Data buffer (*3) 8 MB Data block length (Logical data length=Physical data length) (*4) 512 to 528 bytes (Fixed length) Ο : Provided × : Not provided (*1) The driver mode (Single-ended or LVD) changes automatically by Diffsence signal level. (*2) 1MB/s=1,000,000 bytes/s (*3) 1MB=1,048,576 bytes (*4) Refer to (13) of Section 1.1. C141-E270 29