Fujitsu MHT2080AH Manual/User Guide - Page 137
SMART X'B0, Command error to subcommands other than those of the SMART Enable
UPC - 000051231149
View all Fujitsu MHT2080AH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
5.3 Host Commands (29) SMART (X'B0) This command predicts the occurrence of device failures depending on the subcommand specified in the FR register. If the FR register contains values that are not supported with the command, the Aborted Command error is issued. Before issuing the command, the host must set the key values in the CL and CH registers (4Fh in the CL register and C2h in the CH register). If the key values are incorrect, the Aborted Command error is issued. If the failure prediction function is disabled, the device returns the Aborted Command error to subcommands other than those of the SMART Enable Operations (with the FR register set to D8h). If the failure prediction function is enabled, the device collects and updates data on specific items. The values of items whose data is collected and updated by the device in order to predict device failures are hereinafter referred to as attribute values. C141-E195-02EN 5-67