Fujitsu MHW2060AT Manual/User Guide - Page 12
CSEL setting
UPC - 683728124106
View all Fujitsu MHW2060AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation Conditions 3.4.4 CSEL setting Figure 3.13 shows the cable select (CSEL) setting. Open 1 CA 2 DB Short Note: The CSEL setting is not depended on setting between pins Band D. Figure 3.13 CSEL setting Figure 3.14 and 3.15 show examples of cable selection using unique interface cables. By connecting the CSEL of the master drive to the CSEL Line (conducer) of the cable and connecting it to ground further, the CSEL is set to low level. The drive is identified as a master drive. At this time, the CSEL of the slave drive does not have a conductor. Thus, since the slave drive is not connected to the CSEL conductor, the CSEL is set to high level. The drive is identified as a slave drive. drive drive Figure 3.14 Example (1) of cable select 3-12 C141-E250