Fujitsu N6110 N6110 BIOS Guide - Page 21

Security Menu SECURITY MENU - SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through The Setup Utility on page 2 for more information.) The following tables show the names of the menu fields for the Security menu and its submenus, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection. If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data. ■ If you make an error when re-entering the password a [Warning] will be displayed on the screen. To try again press the Enter key and then retype the password. Press the Esc key to abort the password setting process. ■ Entering a password incorrectly 3 times in a row will cause the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed and a constant tone will be emitted. If this happens, restart the computer by turning off and on the power with the power switch and use the correct password on reboot. ■ If the Power Management Security is Enabled and the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes. Power Management Security will work only if Password boot is enabled. PhoenixBIOS Setup Utility Main Advanced Security Boot Info Exit Supervisor Password Is: User Password Is: Clear Clear Set Supervisor Password Set User Password Minimum User Password Length: Password on Boot: On Automatic Wake up: KB Lock on Resume: Boot from Removable Media: Flash Write: Hard Disk Security Owner Information [Enter] [Enter] [0] [Disabled] [Disabled] [Disabled] [All] [Enabled] Item Specific Help Press key to set Supervisor Password to enable any password features. Then password entry is required to enter BIOS Setup. ▲ ▲ ▲ F1 Help ESC Exit Select Item -/Space Change Values Select Menu Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 13. Security Menu 21