Fujitsu P1630 P1630 BIOS Guide - Page 19
Exiting from the Security Menu, Table 12: Fields, Options and Defaults for the Security Menu - case
![]() |
UPC - 611343083591
View all Fujitsu P1630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Security Menu Table 12: Fields, Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor -- Password is: Clear A display-only field. Set is displayed when the system supervisor password is set and Clear when it is not. User Password is: -- Clear A display-only field. Set is displayed when the general user password is set, and Clear when it is not. Set Supervisor -- Password [Enter] Sets, changes or cancels the Supervisor Password. The Supervisor Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility. NOTES: If your system has the Pre-Boot Authentication (PBA) feature, you cannot log in as a supervisor using your fingerprint. Note, also, that on fingerprintenabled PBA systems, when the supervisor password is cleared, the BIOS will display a message asking you to acknowledge that the BIOS fingerprint data will be cleared as well. Set User Password -- [Enter] This field can only be accessed if the Supervisor Password is set. Sets, changes or cancels the User Password. A User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press [Enter] key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a User Password is set it must be used to access the BIOS setup utility. Minimum User -- Password Length: [0] Supervisor can set password length (0 to 8) for user password. User cannot set a password shorter than the minimum length. Password on Boot: ■ Disabled ■ First Boot ■ Every Boot [Disabled] When set to First Boot, a password (User or Supervisor) is required just once after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Every Boot, a password (User or Supervisor) is required every time after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Disabled no password is required. NOTE: If your system has the Pre-Boot Authentication (PBA) feature, this field must be set to [Every Boot] to ensure that the PBA window appears. On Automatic Wake up: ■ Disabled ■ Enabled [Disabled] When disabled, password entry is not required when the system wakes up automatically. When enabled, password entry is required upon wake up. Boot from Removable Media: ■ All [All] ■ Supervisor only Supervisor only allows access to boot the computer to removable media after the Supervisor Password is entered. Flash Write: ■ Disabled ■ Enabled [Enabled] When disabled, the BIOS Flash memory will be write protected. Hard Disk Security: -- -- Configures hard disk security features Owner -- Information: -- Sets Owner information. TPM (Security ___ Chip) Setting ___ Opens the Trusted Platform Module (TPM) Security Chip Setting submenu to configure the Security Chip. Exiting from the Security Menu When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys. 19
![](/manual_guide/products/fujitsu-p1630-p1630-bios-guide-fd3928f/19.png)