Fujitsu P8010 P8010 BIOS Guide - Page 22

LifeBook P Series BIOS Hard Disk Security Submenu of the Security Menu The Hard Disk Security submenu is for configuring hard disk security features. Phoenix TrustedCore(tm) Setup Utility Info System Advanced Security Boot Exit Hard Disk Security Item Specific Help Drive0: Set Master Password Set User Password Clear [Enter] [Enter] Password Entry on Boot: [Enabled] F1 Help ESC Exit Select Item -/Space Change Values F9 Setup Defaults ▲ Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 14. Hard Disk Security Submenu Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu Menu Field Drive0: Set Master Password Options ___ ___ Set User Password ___ Password Entry on Boot: ■ Disabled ■ Enabled Default Clear [Enter] [Enter] [Enabled] Description Display-only. Default is Clear. When the Drive0 Password has been set, the field changes to Set. When this password is set, the primary hard disk drive cannot be used in another system unless the password is entered. Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set, it must be used to access the hard drive if it is used in another system. Note that the password will not take effect until the system has been rebooted. Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Drive0 User Password is set, it must be used to access the modular hard drive if it is used in another system. Note that the password will not take effect until the system has been rebooted. When set to disabled, entry of a Hard Disk Password is not required before OS boot. (The hard disk is still password-protected without password entry.) 22