Fujitsu PA03338-B005 Getting Started - Page 25

ATTENTION This screen may not be displayed when the, "Autoplay" setting of your PC is turned off. In this case, please run "Install.exe" on the CD-ROM directly from explorer or "My Computer". 4. Click [Install Products]. 7. Select an appropriate language used for the installation from the window and click [OK]. 5. Click [ISIS Driver]. 6. The Error Recovery Guide Installation window appears. Error Recovery Guide is a software providing you with troubleshooting information displayed on the screen when a scanner error occurs. Not installing this software will not have an effect on the performance of the scanner. However it is recommended to install this software. ATTENTION When you select [Yes] for installing Error Recovery Guide, [Choose Setup Language] window appears. Select a language and follow the instructions on the window. Error Recovery Guide will automatically start on finishing its installation. Please wait until the installation of ISIS driver automatically starts. 8. Install the application following the instructions on the window. 9. When the [InstallShield Wizard Completed] appears, click on [Finish]. 10. The system is restarted and the scanner will be detected. Do not remove the Setup CD-ROM until the PC is restarted completely. ATTENTION Depending on the OS, the following operations may be necessary. For Windows 98: When a request for inserting the CDROM of Windows 98 appears, insert it into the CD drive and click the [OK] button. For Windows 2000: When [Digital Signature not Found] appears, click [Yes]. For Windows XP: 1. When [Found New Hardware Wizard] appears, confirm that the Setup CD-ROM is set in the CD drive, then click the [Next] button. 2. When any alarm is displayed on [Hardware Installation] window, click the [Continue Anyway] button. 3. Click the [Finish] button. Now the installation of the scanner driver is completed. 2-9