Fujitsu S1500 Operator's Guide - Page 329
Close the ADF top pickup performance. - pickup roller
UPC - 097564307577
View all Fujitsu S1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
Cleaning the Inside of the ScanSnap Turn on the ScanSnap before cleaning the following locations, and clean the following rollers while rotating them. • Feed rollers (× 2) Clean lightly taking care not to roughen the surface of the rollers. Take particular care in cleaning the rollers since debris left on the roller adversely affects the feed performance. • Eject rollers (× 2) Clean lightly, taking care not to roughen the surface of the rollers. Take particular care when cleaning the eject rollers since debris on these rollers adversely affect the pickup performance. Holding the [Scan] button down for 3 seconds while the ADF top section is open activates the cleaning mode. In this mode, every time the [Scan] button is pressed, the feed and eject rollers rotate about 1/6th of a full turn. Connect the AC adapter and power cable only when cleaning the feed rollers and eject rollers. 3. Close the ADF top section. ADF top section ADF paper chute (cover) ⇒ You should hear the ADF top section click when it returns to its original position. Make sure that the ADF top section is completely closed. Otherwise, paper jams or other feeding errors may occur. 329