Fujitsu S300M Operator's Guide - Page 19

Do not use the scanner while driving a car. Do not use the scanner while driving a car for safety. Accidents can happen. Do not expose the scanner to excessive heat. Do not leave the scanner in the direct sunlight, at high temperature such as in a car in the scorching sun, or near heating apparatus. Doing so might cause excessive heat to build up inside the scanner, causing heating, deforming, or melting of the scanner parts (e.g., cover), and raising the temperature inside the scanner, which could result in fire or scanner trouble. Install the scanner in a wellventilated location. Before moving the scanner, unplug the power cord from the power outlet. Do not move the scanner with the power and interface cables connected as this might damage the cables, causing fire, electric shock or injuries. Before moving the scanner, be sure to disconnect the power plug from the power outlet, and disconnect interface cables as well. Also, make sure that the floor is free of obstructions. Avoid any contact when scanner is working. Avoid getting a sleeve, necktie, or hair caught up in any scanner mechanism when scanning as this may cause injuries. Do not use aerosol sprays near the scanner. Do not use any aerosol sprays or alcohol based sprays to clean the scanner. Dust blown up by strong air from the spray may enter the inside of the scanner. This may cause the scanner to fail or malfunction. Sparks, caused by static electricity, generated when blowing off dust and dirt from the outside of the scanner may cause a fire. ScanSnap S300M Operator's Guide xvii