Fujitsu XG2600 Quick Start Guide

.

Login: admin

Password: [ENTER]

<WARNING> weak admin's password: set the password

XG2600# _

Additional warranty options are also available from Fujitsu

:

XG2600FAM-OOW-YR1

:

XG2600 additional one year of warranty (total of 4 years)

XG2600FAM-OOW-YR2

:

XG2600 additional one year of warranty (total of 5 years)

All documentation and current versions of firmware are available in the

Support and Downloads section of Fujitsu website:

For technical support, please email:

Or telephone +01-949-855-5502, 8:00 a.m. to 5 p.m. PST.

Part Number: QSGXG2600-A01

Fujitsu XG2600 10 Gigabit Ethernet Switch

Quick Start Guide

10 Gigabit Ethernet Adapters

SB0001-A01

Enterprise Server Adapter

SB0001-A02

Midrange Server Adapter

Thank you for purchasing the Fujitsu XG2600 10Gb Ethernet. This Quick

Start Guide is designed to minimize the time and effort required for an IT

Professional to become acquainted with , install, configure and deploy the

switch. Please take a few minutes to review this Guide.

It is recommended that the switch be powered up and basic management

functions be configured before installation . Complete the following

instructions to assure successful deployment in a minimum amount of time:

1.

Unpack the switch and accessories. Check that all items are present

as shown in the diagram on page 18 of the Hardware Guide .

2.

Connect the switch console port to a host system using a serial

crossover cable (not supplied) and the serial-to-RJ45 cable adapter

included with the switch.

3.

Configure a terminal session on the host for a serial connection at

9600 baud, no parity, 8 data bits, 1 stop bit, and no flow control with

VT100 terminal emulation.

4.

Plug both AC power cords into an AC outlet and the other ends into

the XG2600.

5.

When the switch Ready LED stops blinking, login via the terminal

session:

Fujitsu

Frontech

North

America

©2011 Copyright 2011 Fujitsu Frontech North America Inc. All rights reserved. Fujitsu and the Fujitsu logo are registered trademarks. All

other trademarks are the property of their respective owners. Statements herein are based on normal operating conditions and are not

intended to create any implied warranty of merchantability or fitness for a particular purpose. Fujitsu Frontech North America Inc. reserves

the right to modify at any time without notice these statements, our services, products, and their warranty and performance specifications.

Fujitsu Frontech North America, Inc.

www.fujitsufrontechna.com

25902 Towne Centre Drive, Foothill Ranch, CA. 92610