Ganz Security ZC-DWN5212NXA ZC-D5000NXA Series Manual - Page 7

Attaching to a 4S junction box Be sure to use the adapter ring to attach the camera body when embedding it in the 4S junction box. 1 Attaching the adapter ring Attach the adapter ring to the 4S junction box.  Please use screws that are suitable for the 4S junction box.  Do not tighten the screws to the extent that the adapter ring is bent. 2 Attaching the camera body 1 Remove the surface mount cover from the cam- era body. 2 Remove the body cover, Attach the camera body to the adapter ring.  Please use the self-tapping screws included. Do not use any other screws. Connecting the cables 1 Connect the power cable.  While using 12 V DC, connect the positive (+) side to "+12 V DC." 12V DC connection 24V AC connection  Be sure to check that the cables are connected correctly before turning the power on.  Turning on the power when the cables are connected with incorrect polarity may dam- age the camera.  While using 24 V AC, use power supply marked "Class 2." 2 Connect the video cable running from the monitor to the video relay cable. Connect the video cable running from the monitor to the video relay cable attached to the camera body. Connect the video cable from the monitor here. EG-7