Garmin 010-11018-00 Quick Start Manual - Page 3

➊ Install Garmin Mobile PC™ on Your Laptop 1. Insert the Garmin Mobile PC DVD-ROM into the CD drive on your laptop. note: If you are using an ultra-mobile PC (UMPC) or tablet PC, see your device documentation for instructions on how to install software. note: Garmin Mobile PC is compatible with Windows® 2000 SP2, XP, and Windows Vista® operating systems. 2. When prompted to install the Garmin Mobile PC navigation software, click Next. Follow the instructions on the installation wizard to finish installing the navigation software on your laptop. Note: If you are prompted to enter a product key, enter the product key listed on the product packaging. Garmin Mobile PC™ Quick Start Manual Connect GPS Receiver If you purchased Garmin Mobile PC with a GPS (Global Positioning System) receiver, connect the receiver to a USB port on your laptop. 1. Place the GPS receiver on a flat surface, and plug it into a USB port on your laptop. 2. To help secure the GPS receiver, insert the cable into the slit in the suction cup. Make sure the suction cup is located close to the GPS receiver to help prevent movement. GPS receiver Suction cup 3. Attach the suction cup to a hard surface. ➋ Acquire GPS Signals 1. Open Garmin Mobile PC. 2. Move to an open area, out of parking garages, and away from tall buildings. Acquiring satellite signals may take a few minutes. The bars in the upper-right corner of the Menu page indicate satellite strength. When at least one bar is green, you can find your destination and go to it.