Garmin Alpha Quick Reference Guide - Page 1

Alpha™ 100 and TT™ 10 Quick Reference  Warning See the Important Safety and Product Information guide in the product box for product warnings and other important information. Adding a Dog to the Handheld Using MURS One Alpha 100 handheld can track up to twenty devices (TT 10 dog device collars and Alpha 100 handhelds). 1 If necessary, turn off the collar by holding the Power key until the status LED turns red, about 3 seconds, and release. 2 Hold the Power key until the collar emits two series of beeps, about 2 seconds, and release. The status LED begins blinking rapidly. The collar is now ready to be linked, or paired, with a handheld device. 3 On the handheld, select Dog List > Add Dog. 4 Bring the collar near the handheld, and select Yes. 5 Enter the name of the dog, and select > OK. The dog is added and an ID number is randomly assigned. If the number interferes with another collar in the area, you can change the dog ID. Adding a Hunter to Your Handheld 1 On your handheld, select > Contacts > Add. 2 Bring the handhelds near each other, and select Yes on your handheld device. 3 On the other hunter's handheld, select > Contacts > Pair. 4 On your handheld, enter the name of the hunter, and select > OK. 5 If you would like to be added to the hunter's handheld device, repeat this procedure using the hunter's handheld device. Finding Contact and Dog IDs and Codes You may need to share the track and train codes for your dog or your IDs for your dog or handheld. 1 Select an option: • To view the dog codes and ID, select Dog List, and select the dog. • To view the contact ID, select > Contacts, and select the contact. 2 Select Show Info. If you share a dog's track code, the other hunter can view your dog's location with the map and dog tracking compass. If you share a dog's train code, the other hunter can track your dog and train your dog using stimulation. July 2012 190-01500-01_0A Printed in Taiwan