Garmin Delta SE Owners Manual - Page 10
Charging the Dog Collar Device, Turning On the Devices, Delta SE, Dog Collar Device Specifications
View all Garmin Delta SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Charging the Dog Collar Device NOTICE To prevent corrosion, thoroughly dry the contacts on the collar and the surrounding area before connecting the charging clip. Before you put the collar on the dog, remove the charging clip. If you do not remove the clip, it may become detached from the collar and become lost. You should fully charge the battery before you use the device for the first time. Charging a fully depleted battery takes about two hours. The device will not charge when it is outside the charging temperature range (Delta SE Dog Collar Device Specifications, page 14). 1 Snap the charging clip onto the device. 2 Plug the small end of the power cable into the USB port on the charging clip. 3 Plug the other end of the power cable into a power source. The status LED is solid red when the collar is charging. 4 After the status LED turns solid green, remove the charging clip from the collar. NOTE: The dog collar device returns to factory default settings each time it is charged or turned off. Turning On the Devices • Connect the handheld device to the charging cable and plug it into a power source to turn it on for first-time use (Charging the Handheld Device, page 5). After it has been connected for charging the first time, the handheld device is always on. • On the dog collar device, hold the power button until the status LED flashes and the collar beeps. 6 Getting Started