Garmin Delta XC Owners Manual - Page 5

Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Delta XC System Before you can use the Delta XC system, you must set up the devices. 1 Attach the dog collar device to the collar strap (Attaching the Dog Collar Device to the Collar Strap). 2 Charge the handheld device (Charging the Handheld Device). 3 Charge the dog collar device (Charging the Dog Collar Device). 4 Turn on the devices (Turning On the Devices). 5 If necessary, pair the dog collar device with the handheld device (Pairing a Dog Collar Device with the Handheld Device). Device Overviews Delta XC Handheld Device Delta XC Dog Collar Device Power key À Status LED Á Contact points  Charging clip contacts à Attaching the Dog Collar Device to the Collar Strap 1 With the buckle facing outward, insert the end of the collar À strap through the slot on the collar device. Á Power key / BarkLimiter™ key (Delta Sport™ XC only) À Intensity level selection keys Á Training keys  Dog collar device selection key à Training mode selection key Ä LCD display Å LCD Display 2 Pull approximately two-thirds of the collar strap through the slot. 3 Insert the end of the collar strap through the slot on the  opposite side of the device. 4 Pull the strap until it is tight across the front of the device. Charging the Handheld Device NOTICE To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer. You should fully charge the battery before you use the device for the first time. Charging a fully depleted battery takes about 2 hours. NOTE: The device does not charge when it is outside the temperature range of 0° to 40°C (32° to 104°F). 1 Lift the weather cap . À Selected dog collar device À Stimulation intensity level Á Battery charge level  Selected training mode à BarkLimiter mode (Delta Sport XC only) Ä Getting Started 2 Plug the small end of the power cable into the mini-USB port on the device. Á 3 Plug the other end of the power cable into an appropriate power source. 1