Garmin Edge 205 Owner's Manual - Page 17
not enough room between, sensor arm and spoke. Make - owner s manual
UPC - 753759051754
View all Garmin Edge 205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2. Attach the pedal magnet to the crank arm using the adhesive mount and a cable tie. Make sure the pedal magnet is within 5 mm of the GSC10 and the indication line on the pedal magnet lines up with the indication line on the GSC10. 3. Attach the spoke magnet by unscrewing the magnet from the plastic piece. Then place the spoke in the groove of the plastic piece and tighten slightly. The magnet can face away from GSC10 if there is not enough room between sensor arm and spoke. Make sure the magnet is aligned with the sensor arm indication line. GETTING STARTED 2 Pedal magnet on crank arm cable tie indication line 4. Unscrew and move the sensor arm to within 5 mm of the spoke magnet. You can also tilt the GSC10 closer to either magnet for improved alignment. Edge™ 205/305 Owner's Manual 17