Garmin Forerunner 910XT Quick Start Guide - Page 5
PuttinG on the HeArt RAte, Monitor, goinG for A Run - w heart rate monitor
View all Garmin Forerunner 910XT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Fitness equipment is active. Run sport is active. Bike sport is active. Swim (open or pool) sport is active. Other sport is active. Putting on the Heart Rate Monitor NOTE: If you do not have a heart rate monitor, you can skip this task. NOTE: The Forerunner cannot record heart rate data while swimming. Wear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your run. 1 Connect the heart rate monitor module ➊ to the strap. ➊ 2 Wet both electrodes ➋ on the back of the strap to create a strong Forerunner 910XT Quick Start Manual connection between your chest and the transmitter. ➋ 3 Wrap the strap around your chest, and connect it. The Garmin logo should be right-side up. 4 Bring the device within range (3 m) of the heart rate monitor. TIP: If the heart rate data is erratic or does not appear, you may have to tighten the strap on your chest or warm up for 5-10 minutes. After you put on the heart rate monitor, it is on standby and ready to send data. When the heart rate monitor is paired, a message appears, and appears solid on the screen. Going for a Run Before you can record history, you must locate satellite signals (page 3) or pair your Forerunner with an optional foot pod. 1 Select START to start the timer ➊. 5