Garmin G500 Pilots Guide - Page 107

Foreword Sec 1 System Sec 2 PFD Sec 3 MFD Sec 4 Hazard Avoidance Features 1) While viewing the Aux mode System Setup page, press the MENU key. Figure 3-64 Aux Mode System Setup Page Menu 2) Turn the large or small MFD knobs to highlight the desired selection and then press ENT. 3.4.1.1 Display Brightness Display brightness mode may be set to manual or automatic. The automatic mode will set the display brightness based on the ambient light. The manual mode allows the setting of display brightness between 0 and 100%. 1) Turn the large MFD knob to reach the AUX page group. Press the small MFD knob to activate the cursor. 2) The Level will be highlighted. Turn the small MFD knob to select the Display Brightness Level and then press ENT. Figure 3-65 Aux Mode Display Brightness Level Selection 3) If the Level was changed, Manual will be selected. Press the cursor to save the settings. If you press ENT the Mode setting will be highlighted. 4) With the Mode value highlighted, turn the small MFD knob to select Auto or Manual and then press ENT. Sec 5 Additional Sec 6 Annun. & Alerts Sec 7 Symbols Sec 8 Glossary Appendix A Appendix B Index Figure 3-66 Aux Mode Display Brightness Mode Selection 190-01102-02 Rev. B Garmin G500 Pilot's Guide 3-43