Garmin GDL 30A Installation - Page 1
Garmin GDL 30A - XM Radio Tuner Module Manual
UPC - 753759080259
View all Garmin GDL 30A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
GDL™ 30A XM Weather Data Receiver Installation Instructions To obtain the best possible performance, install the GDL 30A Weather Data Receiver according to the following instructions. If you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer. Product Registration Help us better support you by completing our online registration today! Connect to our Web site at http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place. Contact Garmin Contact Garmin if you have any questions while using your GDL 30A. In the USA contact Garmin Product Support by phone: (913) 397-8200 or (800) 800-1020, or go to www.garmin.com/support/. In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the UK). WARNING: See the Important Safety and Product Information guide in the product box for product warnings and other important information. Important Numbers For future reference, write down the important numbers associated with your GDL 30A. The serial number is located on the bottom of the unit. Serial number Unique ID numbers are associated with your GDL 30A. XM Satellite Radio™ uses these ID numbers to activate and deactivate your XM weather and XM audio. To locate the ID numbers on a GPSMAP® 3000 Series chartplotter, refer to the Main Menu section of the GDL 30A Owner's Manual. To locate the ID numbers on a GPSMAP 4000 or 5000 Series chartplotter, select Configure > System > System Information. XM WX Weather™ ID XM Radio ID Packing List, Accessories, and Tools Needed Before installing your unit, check that your package includes the following items. If any parts are missing, contact your Garmin dealer immediately. Standard Package • GDL 30A unit Optional Accessories • GMS 10 network port expander • 7-pin power cable • Garmin Marine Network cables (20 ft. and 40 ft.) • Garmin Marine Network cable-6 ft. (1.8 m) • Documentation Tools Needed (Not Included) • Drill and drill bits • Audio cable • Fasteners (to mount the GDL 30A) • Grommet • Hole saw, 1 in. (surface-mount cable hole) • GA 32 Antenna • Screwdriver (surface-mount screws) ◦ Surface-mount bracket • Center punch and hammer (to mark surface-mount pilot holes) ◦ Pole-mount bracket • Countersink bit (when mounting on fiberglass) ◦ Under-deck mount bracket • Marine sealant (for certain mounting options) ◦ Mounting hardware (screws and adhesive pads) May 2008 190-00930-02 Rev. B Printed in Taiwan