Garmin GDL 39 3D GDL 39 User's Guide - Page 26

External Antenna (Optional), The GDL 39R uses BNC antenna connectors.

Get Garmin GDL 39 3D PDF manuals and user guides View all Garmin GDL 39 3D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

NOTE: The Discrete Input may be used for a remote On/Off switch. Grounding this input turns the unit on and removing ground turns the unit off. If a remote switch is not used, do not connect this wire. NOTE: Secure unused wires to prevent unintentional connections. NOTE: If the external serial device is not used, TxB should be left unconnected and RxB should be connected to ground. 3.2 External Antenna (Optional) The GDL 39 includes an internal GPS and detachable ADS-B antenna, but can use an optional external GPS antenna and/or an external ADS-B antenna. Use the installation instructions provided with the optional antennas. The GDL 39R includes an internal GPS antenna and can use an optional external GPS antenna. An external ADS-B antenna is required for the GDL 39R. The GDL 39R uses BNC antenna connectors. NOTE: The GDL 39 can receive GPS information when interfaced with certain Garmin GPS receivers. Refer to your specific Garmin display manual to determine if this is supported. 3-8 Garmin GDL 39 Portable ADS-B and GPS Receiver User's Guide 190-11110-00 Rev. H

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
3-8
Garmin GDL 39 Portable ADS-B and GPS Receiver User’s Guide
190-11110-00
Rev. H
NOTE
:
The Discrete Input may be used for a remote On/Off switch.
Grounding this input turns the unit on and removing ground turns the
unit off. If a remote switch is not used, do not connect this wire.
NOTE
:
Secure unused wires to prevent unintentional connections.
NOTE
:
If the external serial device is not used, TxB should be left
unconnected and RxB should be connected to ground.
3.2
External Antenna (Optional)
The GDL 39 includes an internal GPS and detachable ADS-B antenna, but can
use an optional external GPS antenna and/or an external ADS-B antenna. Use the
installation instructions provided with the optional antennas.
The GDL 39R includes an internal GPS antenna and can use an optional
external GPS antenna. An external ADS-B antenna is required for the GDL 39R.
The GDL 39R uses BNC antenna connectors.
NOTE
:
The GDL 39 can receive GPS information when interfaced with
certain Garmin GPS receivers. Refer to your specific Garmin display manual
to determine if this is supported.