Garmin GHP Reactorâ„¢ Steer-by-wire Corepack for Volvo-Penta I - Page 1
Garmin GHP Reactorâ„¢ Steer-by-wire Corepack for Volvo-Penta Manual
View all Garmin GHP Reactorâ„¢ Steer-by-wire Corepack for Volvo-Penta manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
GHP® Reactor™ Steer-by-Wire Volvo® Gateway Addendum When installing the Garmin autopilot on your boat, refer to this diagram to connect the autopilot to the steering system through this gateway. Item Description ➊ Autopilot gateway. This connects to the steering system of your boat. ➋ Gateway data bus. The included T-connectors must be assembled as shown to properly communicate with the autopilot gateway. ➌ The included power cable must be connected to a 9-24 Vdc power source for the autopilot to communicate with the gateway. When the Autopilot LED ➊ on the gateway adapter is solid, the data bus is correctly connected to power. Gateway Troubleshooting If the autopilot does not appear to be correctly communicating with the steering system of the boat, you should observe the Diagnostic LED ➋ on the gateway adapter. LED Behavior Description Troubleshooting Off The gateway is not receiving power from the steering system. The gateway may not be connected correctly to the steering system. Solid The gateway is receiving power from the steering system, but Check all connections. is not receiving communication from either side. Flashing double-blink The gateway is receiving data from the steering system, but Check all autopilot connections. not from the autopilot system. Flashing triple-blink The gateway is receiving data from the autopilot, but not from Check all steering-system connections. the steering system. Flashing The gateway is properly receiving and transmitting data.