Garmin GMA 350 Pilot's Guide - Page 24

GMA 350 Audio Panel CLEARANCE RECORDER AND PLAYER The GMA 350 contains a digital clearance recorder that records up to 2.5 minutes of the selected COM radio signal. Recorded COM audio is stored in separate memory blocks. Once 2.5 minutes of recording time have been reached, the recorder begins recording over the stored memory blocks, starting from the oldest block. Pressing the PLAY Key once plays the latest recorded memory block. The Play function can also be accessed via Voice Recognition commands. Refer to the 'Voice Recognition' section for more information. Pressing the MKR/MUTE Key during play of a memory block stops play. If a COM signal is detected during play of a recorded memory block, play is halted. Pressing the PLAY Key while audio is playing begins playing the previously recorded memory block. Each subsequent press of the PLAY Key selects the previously recorded memory block. Powering off the unit automatically clears all recorded blocks. Stops Play Marker Mute Key VOICE RECOGNITION Voice Recognition allows the pilot /copilot to control the GMA 350 using spoken commands. To activate Voice Recognition, press and hold the "Push-to-Command" button while speaking a command. The release of the "Push-to-Command" button signals the GMA 350 to respond. Spoken commands are generally the action or button followed or preceded by a command (e.g., "Select", "Enable", "Disable", etc). The following table lists the available Voice Recognition commands and their associated actions: 24 Garmin GMA 350 Pilot's Guide 190-01134-12 Rev. C