Garmin GMI 10 Digital Marine Instrument Display Installation Instructions, S/N - Page 5
Connecting the GMI 10 to an Existing, NMEA 2000 Network, Creating a Basic NMEA 2000 Network, Notes
View all Garmin GMI 10 Digital Marine Instrument Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
GMI 10 Installation Instructions NMEA 2000 device (not included) T-connector (included) NMEA 2000 device (not included) Drop cable (included) Existing NMEA 2000 network Connecting the GMI 10 to an Existing NMEA 2000 Network Ignition or in-line switch Fuse + - 12 Vdc battery Power cable T-connectors Female terminator Drop cable NMEA 2000 device (not included) Additional drop cable and T-connector (not included) Male terminator Creating a Basic NMEA 2000 Network Notes: • To add additional sensors to your NMEA 2000 network, follow the instructions included with the sensor. • To learn more about NMEA 2000 and building a NMEA 2000 network, visit www.garmin.com. • The GMI 10 is not powered by the NMEA 2000 network, it must be separately connected to the power source. GMI 10 Installation Instructions