Garmin GMR Fantom 18x/24x Dome Radar Installation Instructions - Page 1
Garmin GMR Fantom 18x/24x Dome Radar Manual
View all Garmin GMR Fantom 18x/24x Dome Radar manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
GMR™ FANTOM™ 18X/24X INSTALLATION INSTRUCTIONS Important Safety Information WARNING Failure to follow these warnings, cautions, and notices could result in personal injury, damage to the vessel or device, or poor product performance. See the Important Safety and Product Information guide in the product box for product warnings and other important information. The radar transmits electromagnetic energy. To avoid possible personal injury, damage to the vessel or device, or poor product performance, ensure that the radar is installed according to the recommendations in these instructions and that all personnel are clear of the path of the radar beam before transmitting. When properly installed and operated, the use of this radar conforms to the requirements of ANSI/IEEE C95.1-1992 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields. To avoid possible personal injury, do not look directly at the antenna at close range when the radar is transmitting. Eyes are the most sensitive part of the body to electromagnetic energy. When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product warranty. CAUTION This device should be used only as a navigational aid. Using the device for any purpose requiring precise measurement or direction, distance, location, or topography may result in personal injury or damage to the vessel. To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Opening the device may result in personal injury and/or damage to the device. This device contains no userserviceable parts, and should be opened only by a Garmin® authorized service technician. Any damage resulting from opening the unit by anyone other than a Garmin authorized service technician will not be covered by the Garmin warranty. NOTICE When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel. Software Update You must update the Garmin chartplotter software when you install this device. For instructions on updating the software, see your chartplotter owner's manual at support.garmin.com. Tools Needed • Drill • 9.5 mm (3/8 in.) drill bit • 32 mm (1 1/4 in.) drill bit (optional) • 4 mm (5/32 in.) hex wrench • 13 mm (1/2 in.) wrench and torque wrench • Marine sealant October 2021 GUID-37571E09-A387-48EF-9FD8-D98FD43CBF80 v1