Garmin GMR xHD3 Radar Installation Instructions - Page 2
Tools Needed, in. wrench and torque wrench
View all Garmin GMR xHD3 Radar manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Tools Needed • #2 Phillips screwdriver • 5 mm hex wrench • Drill and 15.0 mm (19/32 in.) drill bit • 17 mm (21/32 in.) wrench and torque wrench • A length of 3.31 mm² (12 AWG) copper wire to ground the radar housing (and voltage converter, if applicable). • Marine sealant 2
Tools Needed
•
#2 Phillips screwdriver
•
5 mm hex wrench
•
Drill and 15.0 mm (
19
/
32
in.) drill bit
•
17 mm (
21
/
32
in.) wrench and torque wrench
•
A length of 3.31 mm² (12 AWG) copper wire to ground the radar housing (and voltage converter, if
applicable).
•
Marine sealant
2