Garmin GNX Wired Sail Pack 52 GNX Wind Installation Instructions - Page 2

Connection Considerations The marine instrument connects to power and to data sources through a NMEA 2000® network. Although the instrument cannot directly receive NMEA® 0183 data, it can display NMEA 0183 data from sources connected to a GNX 20 or GNX 21 device (sold separately) on the same NMEA 2000 network. The instrument can also receive data from Nexus® instruments and sensors using a GND™ 10 device (sold separately). NMEA 2000 Connection Considerations The marine instrument connects to a NMEA 2000 network on your boat. The NMEA 2000 network provides power to the marine instrument and data from NMEA 2000 devices such as a speed sensor. The included NMEA 2000 cables and connectors allow you to either connect the device to your existing NMEA 2000 network or create a basic NMEA 2000 network if needed. If you are unfamiliar with NMEA 2000, you should read the "NMEA 2000 Network Fundamentals" chapter of the Technical Reference for NMEA 2000 Products. To download the reference, go to garmin.com/manuals/nmea_2000. Specification Material Water Resistance Power usage Unit max. voltage NMEA 2000 input voltage NMEA 2000 load equivalency number (LEN) Measurement Case: fully-gasketed polycarbonate Lens: glass with an anti-glare finish IEC 60529 IPX7 1 1.35 W max 32 Vdc From 9 to 16 Vdc 3 (150 mA at 9 Vdc) © 2015 Garmin Ltd. or its subsidiaries Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GNX™ is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. NMEA 2000® and the NMEA 2000 logo are registered trademarks of the National Marine Electronics Association. Item Description Wired sensor, such as a wind or boat speed sensor GND 10 black box bridge Marine instrument Ignition or in-line switch NMEA 2000 power cable NMEA 2000 drop cable Power source NMEA 2000 terminator or backbone cable NMEA 2000 T-connector NMEA 2000 terminator or backbone cable Specifications Specification Dimensions without sun cover (H×W×D) Dimensions with sun cover (H×W×D) Weight without sun cover Weight with sun cover Temperature range Compass-safe distance Measurement 110 x 115 x 30 mm (4.33 x 4.53 x 1.18 in.) 115 x 120 x 35.5 mm (4.53 x 4.72 x 1.40 in.) 247 g (8.71 oz.) 283 g (9.98 oz.) From 5° to 158°F (from -15° to 70°C) 209 mm (8.25 in.) © 2015 Garmin Ltd. or its subsidiaries 1 The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com/waterrating. support.garmin.com