Garmin GPS 10 Deluxe Garmin Que for Palm OS Applications Guide   - Page 3

INTRODUCTION > INTRODUCTION About the Manuals Garmin Que™ is designed to use Garmin GPS technology as applications with a PDA to provide you with navigational guidance. Garmin Que is provided with three instructional guides. Setup Guide The Setup Guide gives you software installation instructions, and other important details. Before reading the other manuals, read the Setup Guide which is included with the Installation Disk. Quick Start Guide The Quick Start Guide tells you how to get started navigating with a convenient reference for basic features. You can carry this with you as a quick reminder of how features operate and how to access them. The Quick Start Guide is printed on the reverse side of the Setup Guide. Application Guide This Application Guide describes, in detail, how to use the Garmin Que™ application for navigation. Included on the setup Disk, this document is in portable document file (pdf) form, it can be printed from a PC as a paper copy which may be of benefit when you take your device outside to navigate. (Available only on the setup Disk and the Garmin website: www.garmin.com.) Editor's Note: The above manuals and guides were created using the Garmin Que operating software installed on a PDA equipped with popular features and operating with the various versions of Palm OS® v 5. If your make and model PDA meets the requirements stated on the product packaging, it should operate in a manner similar to that described in these guides, but may not include some features discussed in the applications guide. Many PDA features described in this guide are not essential to operation of Garmin Que and are used primarily as convenient alternate methods of operation. It is also important that you understand the operation of your PDA prior to using Garmin Que. The operation of the Garmin Que application requires understanding of standard procedures used for the PDA that are not discussed in detail in the Garmin Que Application Guide. If you purchased your PDA at the same time as the Garmin GPS receiver and are not yet familiar with its operation, it is recommended that you learn how to operate the PDA first. About Garmin Que Setup Once installed on your PDA and in communication with the remote GPS receiver, QueSetup can be accessed from the PDA applications launcher. The QueSetup page provides you with the Que Software version, the remote GPS receiver i.d and version numbers, and Uninstall and Reinstall buttons. Uninstall removes the Que applications completely, while Reinstall prepares for the PDA for upgrades or reinstallation without removing existing voice files or the waypoints list. IMPORTANT NOTE: The Garmin Que has been tested and found to operate in a satisfactory manner when installed in Palm OS powered PDAs and Mobile Phones that meet the minimum operational requirements stated on the product package and on page i of this guide. However, Garmin has no responsibility for the quality or the reliability of performance of those products. A significant issue is the variance in maximum speaker volume for PDAs of different manufacturers. You may find the speaker volume of your PDA to be compromised by road noise and its location in your vehicle when receiving turn-by-turn voice direction prompts while navigating with Garmin Que. It is therefore recommended that you activate the "Attention Tone" feature to prepare you to listen in advance for each voice prompt. Instructions for activating the "Attention Tone" are found on Page 17 of this Guide. Other remedies may be third party devices that can amplify the speaker volume when connected to the auxiliary speaker port of your PDA. Consult your PDA retailer for information concerning these devices. Touch-screen responsiveness for some Garmin Que operating features may vary from PDA to PDA. Que for Palm OS - Applications Guide I